GSM to oz/yd² Converter — Fabric Weight Conversion

Working tool fabric specification

Convert fabric weight while you write the spec.

Enter GSM or oz/yd² and the other value updates immediately. Use the result as a shared language between your buyer brief, tech pack and supplier quote.

Jump to the converter

Convert fabric weight between GSM and oz/yd². Type in either box — the other one updates as you type. No button, no page reload.

Common weights:
160 GSM = 4.72 oz
180 GSM = 5.31 oz
220 GSM = 6.49 oz
280 GSM = 8.26 oz
320 GSM = 9.44 oz
GSM — grams per square metre, the mass of one square metre of fabric. Most of the world’s mills, and nearly every spec written outside the US, use it.
oz/yd² — ounces per square yard, the unit US buyers grew up with and still write into their tech packs. Same fabric, same weight — a 180 GSM jersey and a 5.3 oz/yd² jersey are one cloth described twice.

GSM to oz Conversion Table

Fabric weight conversion, 100–400 GSM
GSM (g/m²) oz/yd²
100 2.95
120 3.54
140 4.13
160 4.72
180 5.31
200 5.90
220 6.49
240 7.08
260 7.67
280 8.26
300 8.85
320 9.44
340 10.03
360 10.62
380 11.21
400 11.80

Keep the rounding honest: two fabrics 5 GSM apart are, for buying purposes, the same weight — a single roll varies by more than that from edge to centre. Chasing decimal places while the cloth itself moves a few percent is precision in the wrong place.

Typical Weight Ranges Buyers Specify

The ranges that turn up again and again in buyers’ specs across the market — general industry reference, not any single factory’s offer.

Typical fabric weight ranges by knit type
Knit fabric Typical GSM oz/yd² Commonly used for
Single jersey 120–220 3.5–6.5 T-shirts, knit tops, underwear, nightwear
Interlock 180–280 5.3–8.3 Premium tees, polos, baby and children’s wear
Rib knit 180–300 5.3–8.8 Cuffs, collars, waistbands, fitted tops
French terry 240–340 7.1–10.0 Sweatshirts, sweatpants, lightweight hoodies
Brushed fleece 260–400 7.7–11.8 Sweatshirts, hoodies, winter loungewear

One caution on rib: its measured weight depends on how far the fabric is stretched when the disc is cut. A rib spec should state that weight is taken with the fabric relaxed — otherwise two honest measurements of the same roll can disagree by more than the tolerance allows.

The Conversion Factor

The factor falls straight out of the unit definitions. One ounce is 28.3495 grams, and one square yard is 0.8361 square metres — so one ounce per square yard is 28.3495 ÷ 0.8361 = 33.906 grams per square metre.

GSM = oz/yd² × 33.906
oz/yd² = GSM ÷ 33.906

Worked example: a 240 GSM French terry is 240 ÷ 33.906 = 7.08 oz/yd². Coming the other way, an 8.5 oz/yd² fleece is 8.5 × 33.906 = 288 GSM.

On the factory floor the number gets checked, not trusted: a circular cutter punches a 100 cm² disc out of the finished fabric, the disc goes on a scale, and the reading scales up to a square metre. When the disc says 173 against a spec of 180, that conversation happens before cutting — not after sewing, and not at final inspection.

What Fabric Weight Changes

Cost

Fabric is bought by weight and consumed by area, so a heavier cloth puts more paid-for yarn into every garment. Step a sweatshirt up from 280 to 340 GSM and the fabric cost per piece climbs roughly in proportion — before freight, which is also charged by weight.

Opacity

Light fabrics in pale colours go sheer. Weight is not the whole story — a tight knit at 150 GSM can cover better than a slack one at 170 — but below roughly 150 GSM, pale single jersey needs its opacity checked on a body, under real light, not flat on the cutting table.

Drape and hand

Heavier cloth holds its shape and falls in straighter lines; lighter cloth drapes closer and shows more of what sits underneath it. Neither is better — a pajama set wants the drape, a structured sweatshirt wants the body. Judge the actual sample twice: once against the light, once on a shoulder.

Putting Fabric Weight in a Tech Pack

Three lines in the fabric section of the tech pack prevent nearly every weight dispute:

  • The target weight, in the unit your mill works in. GSM, or oz/yd² for US programmes. If the buying office and the mill run on different systems, print both — converted with the factor above, not rounded from somebody’s memory of it.
  • A tolerance. Buyers commonly write ±5% on knit fabric weight. Without a band, “180 GSM” is an argument waiting for a delivery to start it.
  • The state of the fabric when weighed. Finished fabric does not weigh what greige cloth weighed before dyeing and finishing. State that the target is the finished fabric, as it will actually be cut.

Our step-by-step guide to how to create a tech pack shows exactly where the fabric specification sits inside the full document, next to the measurement chart and the construction details.